In Delay (Input Delay) Tab - Lectrosonics DM84 Reference Manual

In Delay (Input Delay) Tab

This tab contains controls to set the delay for each input
channel. If connected to a DM84, changes made in this
tab take effect immediately.
Delay controls
Units select
buttons
Name
Delay controls
Units select buttons
Rio Rancho, NM
Description
The delay settings for the input channels are displayed here in one of 3 selectable units of measure:
• Time in milliseconds - adjustable from 0 ("Off") to 100 ms.
• Distance in feet - adjustable from 0 ("Off") to 112.78 ft.
• Distance in meters - adjustable from 0 ("Off") to 34.37 m.
There are two ways to change the delay:
• Click on the buttons next to the control to run the value up or down
• Type a value directly into the control and press ENTER
The value in the control can be copied and pasted into another channel using CTRL-C to copy,
CTRL-V to paste, and then pressing ENTER .
Select the unit of measure using the radio buttons in this group. The values in the delay controls will
be updated immediately if the unit of measure is changed.
As always, the changes are not permanent unless the
DM84 settings are stored to a preset in nonvolatile
memory.
Reference Manual
27