Gabarron ADL 5030/14 Installation Instructions And User Manual page 10

8.- Check that the heating element rests completely on the bricks without restricting a new row (Fig. 4).
9.- Arrange two new rows of bricks, ensuring the flat side of each bricks is facing towards the bottom of the heater, and insert a
new heating element. Repeat the operation for the third heating element. Place the last row of bricks also with the flat side
toward the bottom of the heater. Check there is no gap between bricks.
10.- Connect the heater following the enclosed diagram. Ensure all connections are correct and that no connection is damaged.
Do not leave any remaining wire inside the heater.
11.- Refit the inner front panel. If the bricks have been fitted correctly you will find no difficulty during this action.
12.- Attach the front panel by hanging i ton the "V" in the upper part and securing it at the bottom with the two screws.
13.- Finally, fit the outlet grill with the four screws.
INSTALATION OF THE WIRELESS AMBIENT THERMOSTAT (OPTIONAL).
- Fix the module to the wall vertically.
- Connect the module following the attached diagram and the color code.
- Do not leave any remaining wire inside the heater.
- The wireless ambient thermostat has its own instructions.
fig. 4
fig. 5