Horus Firmware Update Procedure - Merging Horus User Manual

Horus Firmware update procedure

1) Download the latest firmware available. Can be found at
http://www.merging.com/products/horus/downloads
2) Make sure that the .bin downloaded firmware file is on a PC that is on the same network as
your Horus. (Users who have received a .rar will first have to Unrar it)
3) Power up the Horus using the big power button, while pressing down the small triangle button
in order to start up in Maintenance Mode
You can also reboot the Horus in maintenance mode from the Touch Screen Setup menu or
from the Horus Web Access set up page.
4) Keep the small button pressed until the yellow caution border display appears on the TFT
screen
5) Wait until the Horus is fully booted (the progress bar says "Ready")
www.merging.com/horus
Horus User Manual
Page 66