Timecode Menu (I/O & Sync) - Merging Horus User Manual

Status:
TIMECODE Menu (I/O & Sync)
IN Timecode:
OUT Timecode:
Frame Rate:
From:
Timecode Level:
Mute on Stop:
LTC IN: Corresponds to the incoming LTC frame rate
Horus PTP status: MASTER or SLAVE
Video Format Detected:
Supported Formats:
PAL – NTSC
720p23.98– 720p24 – 720p25 – 720p29.97 – 720p30
720p50 – 720p59.94 – 720p60 (not recommended video formats)
1080i25 – 1080i29.97 – 1080i30
1080sf25 – 1080sf29.97 – 1080sf30
1080p23.98 – 1080p24 – 1080p25 – 1080p29.97 – 1080p30
Will display the current incoming LTC/Timecode
Will display outcoming LTC/Timecode
The current LTC/Timecode Frame Rate is indicated next to the Timecode IN &
OUT display
Indicates the Timecode provider (in example above the Pyramix DAW)
Shows the current LTC output level in dBu. The selector offers a choice of
output level from -18dBu to +9dBu in 3dBu increments, or can be switched off
If OFF the LTC output will not be active (default)
If ON the LTC output is generated constantly
www.merging.com/horus
Horus User Manual
Page 38