MUTOH Blizzard Installation Manual page 57

Adjustment procedure
Please follow the instructions below to adjust the printer.
Step 1 : Print the first file ► [Bi-D] ► [F1] – key.
Step 2 : Set the thickness of the media and press ENTER.
Step 3 : Confirm with ENTER to start printing.
Step 4 : Each nozzle row (1A, 1B, 2A, 2B ...) will print 4 blocks from left to right and then 4 from right to
left.
Final Pattern
8B 8A 7B 7A
First swath printed
6B 6A 5B
Second swath printed
5A 4B 4A 3B
57
Installation Guide Blizzard
3A 2B 2A 1B
AP-75261 – Rev. 2.0 – 19/12/07
#3 ALL
#2 ALL
#1 ALL
1A