5.3.3 Connecting the Centronics interface
5.3.3.1
Installation
The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Step 1 :
Power OFF the printer and your computer.
Step 2 :
Plug the cable connector of the interface cable into the interface connector at the back of the
printer. Squeeze the wire clips together until they lock into place.
Step 3 :
Plug the other end of the cable into the computer's port.
Notes
•
R
EFER TO YOUR COMPUTER
'
U
'
G
S
SER
S
UIDE FOR THE PROCEDURE TO CONNECT TO YOUR COMPUTER
39
Installation Guide Blizzard
.
AP-75261 – Rev. 2.0 – 19/12/07