Table of Contents
Advertisement
Step 7 :
Make measurement settings in following menu:
SetupMenu (1/7) ► MediaSet [F4] ► SheetSize
Menu Choice
F1
F2
F3
Step 8 :
Close the front cover.
Step 9 :
Start media initialisation.
Menu Choice
F2
F3
F4
ENTER
Start media initialization
Step 10 : Media will be measured according to the settings made before.
Step 11 : If the media has been loaded correctly, the following message will be displayed:
Description
Auto
Media measurement sequence ► REAR – RIGHT – LEFT – TOP
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
Length
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
Width
Description
Sheet / Roll
Select which kind of media is loaded
Lever Up
Raise the pressure rollers if necessary
User 1-8
Select user profile (1-8)
52
Installation Guide Blizzard
AP-75261 – Rev. 2.0 – 19/12/07
Advertisement
Table of Contents
