Table of Contents
Advertisement
Step 11 : Please wait while the printer is sucking air.
Step 12 : Insert 8 NEW cassettes with Eco-Solvent Ultra Ink in the correct order when following message is
displayed.
Step 13 : The printer will automatically start pumping ink when all cassettes are inserted.
Step 14 : Empty the waste bottle when asked and confirm later on with ENTER.
Step 15 : Perform a NozzleCheck and some cleanings if necessary.
Step 16 : If all nozzles are present, the first ink load procedure has been finished successfully.
Notes
When you have used a syringe to complete the first ink load procedure, it doesn't mean necessarily that
there is something wrong with the printer.
During an ink load, air columns will be created to ease the switch between two liquids. When these air
columns are too big, it might be possible that the pump experiences difficulties and that you have to
intervene manually.
+
When you perform a NozzleCheck and all nozzles are present, no problems will occur during normal
printing activities.
-
When you perform a NozzleCheck and still a lot of nozzles are missing, you will have to search for the
reason, may be a pump is broken or the tube cycle is not complete air tight.
50
Installation Guide Blizzard
AP-75261 – Rev. 2.0 – 19/12/07
Advertisement
Table of Contents
