Table of Contents
Advertisement
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis
8.18 Chassis Fan
1. Prepare the computer for disassembly (Section 8.1).
2. Remove the computer top access panel (Section 8.3.1).
3. Remove the hard drive (Section 8.8.1).
4. Remove the system fan (Section 8.9).
5. Remove the front chassis panel (Section 8.10).
6. Disconnect the power switch cable from the system board (Section 8.12).
7. Disconnect the front I/O cable from the system board (Section 8.11).
8. Disconnect the chassis fan power cable from the system board.
9. Press down on the black plastic mounting clip 1 while pivoting the fan assembly out of the
chassis 2
To install the chassis fan, reverse the removal procedure
8–28
336492-003
Service Reference Guide
Advertisement
Table of Contents
