Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
6. Pull up on the green hard drive drivelock mechanism 1 for that drive and slide the drive
from the drive bay 2.
7. Remove the four guide screws (two on each side) from the old drive and install them in the
replacement drive.
Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives
use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard
screws are silver.
6–20
336492-003
Service Reference Guide, d500