Removal and Replacement Procedures - Small Form Factor (SFF) Chassis
7.5
Computer Access Panel
1. Prepare the computer for disassembly (Section 7.1).
Ä
CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that
the power cord is disconnected from the electrical outlet.
2. Pull up and hold open the latch on the top of the computer 1.
3. Slide the computer cover 2 back about 0.5inch (1.3 cm), then lift it off the unit.
To install the computer cover, reverse the removal procedure.
7–6
336492-003
Service Reference Guide, d500