Placing Dvd-Rom Inside Your Computer - Toshiba SD-M1401 Hardware Instruction Manual

PLACING DVD-ROM INSIDE YOUR COMPUTER

You are now ready to install your DVD-ROM inside your computer.
You should refer to the book that came with your computer, as com-
puter casings are different from each other. Usually the casing is at-
tached to the frame by a number of screws at the back. Turn your
computer around, so the back faces you, and look for 4 or 6 screws
around the edge of the casing. Remove the screws and put them some-
where safe. Lift or slide casing away from computer frame, and place
aside (make sure to allow yourself enough workspace for the DVD-
ROM installation).
The SD-M1401 DVD-ROM drive can be placed in any free half-height
drive slot at the front of your computer. (It can be mounted horizon-
tally or vertically.) You most likely will have to remove the cover plate
which conceals the front of the open slot (see your computer book on
how to remove panel).
Carefully start sliding the DVD-ROM drive into the opening with the
disc tray facing the front of the computer. Before you push the drive
all the way in you will need to connect the SCSI interface cable and
the power cable to the back of the drive.
Installing SD-M1401
7
TOSHIBA SD-M1401 DVD-ROM Drive