Toshiba SD-W1101 Installation Instructions Manual
Toshiba SD-W1101 Installation Instructions Manual

Toshiba SD-W1101 Installation Instructions Manual

Dvd-ram with realmagic hollywood+ playback card
Hide thumbs Also See for SD-W1101:

Advertisement

Quick Links

SD-W1101 DVD-RAM
with REALmagic Hollywood+ Playback Card
Installation Instructions
Congratulations on your purchase of a Toshiba SD-W1101 DVD-RAM
drive and REALmagic Hollywood+ DVD/MPEG-2 Playback Card Kit.
The following information will help you in the simple installation of
your new DVD-RAM. If you are not replacing a presently installed SCSI
CD-ROM with the enclosed DVD-RAM, additional installation hardware
may be required. Refer to REALmagic Hollywood+ User's Guide for
installation instructions on the DVD/MPEG-2 Playback Card.
CHECKING YOUR KIT PACKAGING
Please unpack your DVD kit, and assure that you have the following
items:
l DVD/MPEG-2 PCI Playback Card
l 13" 3.5mm ext. audio cable
l 14" HDB15 - 9 DIN overlay cable
l S-Video to RCA video converter cable
l REALmagic™ Accessory Kit envelope
(with software, demo CD and Playback Card User's Guide)
Additional items you may need that are not included in the kit are:
l Screwdriver
l mounting screws and mounting hardware
l SCSI interface cable
l SCSI host adapter board
l DVD/CD-ROM Sound Cable
SYSTEM REQUIREMENT
The DVD-RAM kit requires the following:
2MB of free hard disk space
16MB of RAM
Pentium-based PC (or compatible), 133MHz or higher
PCI 2.1 compliant expansion slot
VGA Card
Plug and Play BIOS support
Microsoft™ Windows 95 or higher
Amplified stereo speakers
(compatible with all graphics cards)
1

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba SD-W1101

  • Page 1 SD-W1101 DVD-RAM with REALmagic Hollywood+ Playback Card Installation Instructions Congratulations on your purchase of a Toshiba SD-W1101 DVD-RAM drive and REALmagic Hollywood+ DVD/MPEG-2 Playback Card Kit. The following information will help you in the simple installation of your new DVD-RAM. If you are not replacing a presently installed SCSI CD-ROM with the enclosed DVD-RAM, additional installation hardware may be required.
  • Page 2: Setting Jumpers

    The follow steps must be performed to properly install your DVD-RAM. l Set DVD-RAM drive jumper settings. l Connect audio cable. l Install SCSI host adapter board. l Attach SCSI interface cable. l Connect power cable. l Mount DVD-RAM. SETTING JUMPERS The block of mode select jumpers are located on the rear of the DVD- RAM.
  • Page 3: Placing Dvd-Ram Inside Your Computer

    (i.e., CD-ROM or DVD-ROM), remove the drive pres- ently installed in your system. The SD-W1101 DVD-RAM can be mounted horizontally or vertically in any free half-height drive slot at the front of your computer. Carefully start sliding the DVD-RAM into the opening with the disc tray facing the front of the computer.
  • Page 4 SCSI interface cable. Remember that the terminator jumper on the DVD-RAM drive must have the jumper installed when the drive is the last device in the chain. Host Computer I/F Card Terminator SD-W1101 CONNECTION (ONE DRIVE) Host Computer I/F Card Terminator SD-W1101 DAISY-CHAIN CONNECTION Notes: 1.
  • Page 5: Completing Installation

    Audio Cable (optional) - If you have a sound card and speakers, and would like to play audio CDs on your computer, you will need to get a sound cable. Contact AMC, our small parts supplier, at 888/262-9700. Sound cables are made for the sound card you are using and the DVD- RAM to which you are connecting.
  • Page 6 DVD-RAM, just select file and drag and drop it onto DVD-RAM removable disk icon. DVD-RAM FRONT PANEL The photo illustrates the following features of the SD-W1101 DVD-RAM front panel: DVD loading tray...
  • Page 7: Dvd-Ram Recording Cartridge

    • Cartridges are available with single-sided* or double-sided discs. Type 2: • Cartridge is not reversible (side A only). • Disc in cartridge can be removed and replaced. * Your SD-W1101 comes with a Type 1 single-sided cartridge. DVD-RAM NSTALLING ARTRIDGE IN Place cartridge inside of DVD-RAM tray with label facing front of drive.
  • Page 8 SD-W1101 SPECIFICATIONS Data Capacity DVD-RAM (single & double) DVD-R DVD-ROM SINGLE SIDED-SINGLE LAYER DVD-ROM SINGLE SIDED-DOUBLE LAYER DVD-ROM DOUBLE SIDED-SINGLE LAYER DVD-ROM DOUBLE SIDED-DOUBLE LAYER 17 GB CD-ROM Rotational Speed DVD-RAM DVD-ROM/DVD-R CD-ROM Transfer Rate DVD-RAM DVD-ROM/DVD-R CD-ROM Access Time Average Random Access Time: •...

Table of Contents