Toshiba SD-M1401 Hardware Instruction Manual page 14

Installing Power Cable
Audio - If you have a sound card and speakers, and would
(optional)
like to play audio CDs on your computer, you will need to install a
CD/DVD-ROM audio cable. Toshiba's DVD-ROMs use a standard
4-pin CD/DVD-ROM audio cable that can be purchased from most
local computer suppliers. The sound cable connects to your sound
card at one end and the other end connects to the digital audio connec-
tor at the left rear of the DVD-ROM (see DVD-ROM Back Panel
photo for location). Refer to the instructions that came with your sound
card for details on any sound-driver software required. If you are us-
ing a DVD/MPEG card, additional sound options might be available.
Refer to the documentation that came with your DVD/MPEG card.
Installing Audio Cable
9
TOSHIBA SD-M1401 DVD-ROM Drive