Thermal Arc ARCMASTER 200 S Service Manual page 32

Warning!
Disconnect input power before maintaining.
Visual check of
regulator and pressure
Visually inspect the torch
body and consumables
Replace all
broken parts
Art # A-07331
7-2
Each Use
Visual check of torch
Consumable parts
Weekly
Visually inspect the
cables and leads.
Replace as needed
3 Months
Clean
exterior
of power supply
6 Months
Bring the unit to an authorized
Thermal Arc Service Center
to remove any accumulated dirt
and dust from the interior.
This may need to be done more
frequently under exceptionally
dirty conditions.
Maintain more often
if used under severe
conditions