Specifications - Thermal Arc ARCMASTER 200 S Service Manual

3
200S INSTALLATION
NOTE
Due to variations that can occur in manufactured
products, claimed performance, voltages, ratings,
all capacities, measurements, dimensions and
weights quoted are approximate only. Achievable
capacities and ratings in use and operation will
depend upon correct installation, use, applications,
maintenance and service.
7

Specifications

Parameter
Rated Output
Amperes
Volts
Duty Cycle
TIG
Duty Cycle
STICK
Output Current TIG
Range
STICK
Open Circuit Voltage
Dimensions
Width
Height
Length
Weight
Output@Rated Load
Output Amperes
Output Volts
Duty Cycle
KVA
KW
Output@No Load
KVA
KW
Input Volts Single
Phase
230V
200S
115VAC
230VAC
85
160
23
27
100%
35%
200A / 18V @ 20%
230VAC
130A / 15V @ 60%
230VAC
100A / 14V @ 100%
230VAC
85A / 13V @ 100%
115VAC
160A / 27V @ 35%
230VAC
130A / 25V @ 60%
230VAC
100A / 24V @ 100% 230VAC
85A / 23V @ 100%
115VAC
1 - 200 (230V), 1 - 85 (115V)
1 - 160 (230V), 1 - 85 (115V)
57V
5.12" (130mm)
10.24" (260mm)
12.60" (320mm)
17.63 lb. 8.0 kg
115V
230V
85A 160A
23V 27V
100% 35%
4.4 8.7
2.4 5.2
0.5
0.3
Amperage Draw
No Load
@Rated Load
40 1.6
Thermal Arc continuously strives to produce the
best product possible and therefore reserves the
right to change, improve or revise the specifica-
tions or design of this or any product without prior
notice. Such updates or changes do not entitle the
buyer of equipment previously sold or shipped to
the corresponding changes, updates, improve-
ments or replacement of such items.
The values specified in the table above are optimal
values, your values may differ. Individual equip-
ment may differ from the above specifications due
to in part, but not exclusively, to any one or more of
the following; variations or changes in manufac-
tured components, installation location and condi-
tions and local power grid supply conditions.
3 – 3