Transporting Methods - Thermal Arc ARCMASTER 200 S Service Manual

7

Transporting Methods

These units are equipped with a handle for carrying
purposes.
WARNING
ELECTRIC SHOCK can kill.
DO NOT TOUCH live electrical parts. Disconnect
input power conductors from de-energized supply
line before moving the welding power source.
WARNING
FALLING EQUIPMENT can cause serious per-
sonal injury and equipment damage.
 Lift unit with handle on top of case.
 Use handcart or similar device of adequate
capacity.
 If using a fork lift vehicle, place and secure unit
on a proper skid before transporting.
2 – 4
2
200S INTRODUCTION