Set The Interval To Display The Warning Message - MIMAKI JV5-320S Operation Manual

4 Daily Maintenance

Set the interval to display the warning message

Depending on the ambient temperature, set the interval to display the warning preventing color material
settling.
Setting time: OFF (disabled), 12 to 120 hours
When you use sublimation transfer ink Sb52, the display interval of the mes-

sage is set to 72 hours in the initial condition.
When you use sublimation transfer ink Sb51, Sb53 or Sb60, this function is dis-

abled (OFF) in the initial condition.
STEPS:
1
Check that the machine is in the local mode and select [Maintenance] with the [FUNC-
TION] key. Then, press the [ENTER] key.
When it is in the remote mode, press the [REMOTE] key.
2
Select [ROUTINE SETUP] with the [
3
Select [Sub-INK WARNING] with the [] key, and press the [ENTER] key.
4
Set the operation time with the [] or [] key, and press the [ENTER] key.
5
Press the [END] key several times.
The machine returns to the local mode.
4-56
MAINTENANCE
ST.MAINTENANCE <ent>
ROUTINE SETUP
ROUTINE WIPING <ent>
Sub-INK WARNING
Sub-INK WARNING
] key, and press the [ENTER] key.

7 times
MAINTENANCE
ROUTINE SETUP
4 times
ROUTINE SETUP
Sub-INK WARNING
: 84 h
<ent>
<ent>