Before Taking A Phenomenon As A Failure; Power Does Not Turn On; The Printer Cannot Perform Printing - MIMAKI JV5-320S Operation Manual

5 In Case of Trouble

Before taking a phenomenon as a failure

This section describes the corrective actions to be taken at the occurrence of trouble without any error mes-
sage displayed. Take appropriate actions as described below before taking the trouble as a failure.
If still the problem cannot be solved, contact your dealer or an office of MIMAKI.

Power does not turn on

In most cases, this is due to improper connection of the power cable for the printer or computer. Check that
the power cable is connected properly.

The printer cannot perform printing

This occurs when the data is not being transmitted to the printer properly. It can also occur when the print-
ing function does not work properly or the media is not set correctly.
5-2
Is the power cable connected to
the printer?
Yes
Is the main switch ON?
Yes
Does the power turn off imme-
diately after initial operation?
Yes
Turn on the power switch on
the front of the printer. (p. 3-3)
Is the correct interface cable
used?
Yes
Is the interface cable properly
connected?
Yes
Is the message on the display
indicating that ink has run out?
Yes
Replace the ink cartridge with a
new one. (p. 3-67)
No
Securely connect the power
cable.
No
Turn on the main switch.
(p. 3-3)
No
Use the cable exclusive for the
device.
No
Securely connect the interface
cable.