Installation Overview; Installation Hints - Motorola HMVC3075 Quick Start Manual

Wireless motion sensor camera
Hide thumbs Also See for HMVC3075:
Table of Contents


Installation Overview

Installing your camera is a simple process.
Choose an appropriate location for the Wireless Motion Sensor Camera as described in the Installation Hints.
Plug the AC adapter into the wall and the module.
Register your camera with your Wireless System Controller using a process called Discovery. Refer to your
homesight Software User Guide for instructions on how to discover your Wireless Motion Sensor Camera.
Mount the module, using either the tabletop base, or by
table mount, slide the power switch on the base to On.

Installation Hints

Please consider the following points when mounting the camera:
The camera must be aimed so that it does not directly face the sun or any bright light; otherwise, this may cause
damage to the camera.
Avoid viewing areas where half of the area is in bright sunlight and the other half is dark. All types of cameras
have difficulty seeing wide variations of light.
The Motorola Wireless Motion Sensor Camera is constructed of UV-resistant
Wireless Motion Sensor Camera outside, it should be shielded from the elements, such as underneath a porch
roof. Do not install the camera where it is subjected directly to the elements.
Typically, the camera's range is 60–80 feet from
obstacles. These can include metal framing, thick walls, and other wireless devices operating at 2.4 GHz. It is
recommended that different positions be tried.
ng the instructions for wall mounting. If using the
Discovery Button
Detach Base
the Wireless System Controller, depending on the number of
ABS plastic. If installing the

Hide quick links:


Table of Contents

Subscribe to Our Youtube Channel

Table of Contents