Table of Contents
Advertisement
Installation Overview
Installing your camera is a simple process.
1
Choose an appropriate location for the Wired Camera, as described in the Installation Hints.
2
Plug the interface cable from the camera into the Wireless System Controller.
3
Reg
iste your camera with your Wireless System:
r
a.
In the homesight software, click System Se
b.
Select "Device Discovery" fr
c.
Select "Start Discovery."
d.
After a few seconds, the System Controller will
details of the device will appear on the screen.
4
Mount the module, using either the tabletop base or by following the instructions for wall mounting.
Installation Hints
Please consider the following points when mounting the camera:
•
The camera must be aimed so that it does not directly face the sun or any bright light; otherwise, this
may cause damage to the camera.
•
Avoid viewing areas where half of the area is in bright sunlight and the other half is dark. All types of
cameras have difficulty seeing wide variations of light.
•
The Motorola Wired Camera is constructed of UV-resistant ABS plastic. Do not install the camera where it
is subjected directly to the elements.
ttings.
om the menu.
automatically find and register your camera and
3
Advertisement
Table of Contents
