FAQ
The USB Device Controller does not recognize the camera during discovery mode?
Make sure your USB Device Controller indicates discovery mode and that the camera is using the proper power supply (9 volt).
Press the Discovery button found inside of the battery compartment. If this continues to fail, you will need to try another location for
the camera. You may also try a hard reset by holding down the Discovery button while powering up the camera. After resetting the
camera, please try to discover the camera again.
How far away can the camera see?
Depending on the lighting conditions and the size of the object(s), you can view objects up to 200 feet (60 m) away with a viewing
angle of 80 degrees. The motion sensor is capable of detecting objects up to 12 -14 ft. (3.5 - 4 m) with a field of view of 80 degrees.
How sensitive is the camera's microphone?
The microphone picks up normal conversation 6 to 10 feet away.
Features and Specifications
• Device signal communication
• Red LED behind motion detector lens illuminates when activity occurs
• Microphone captures audio
• 80 degree field of view for motion and camera lens
• Auto Brightness, Auto Contrast, Auto White-Balance
• All hardware for either wall or tabletop mounting included
• AC operation
Integrated lens:
Motion and camera lens:
Focus range:
Resolution:
Signal/noise ratio:
Frequency range:
Image sensor:
High-speed electronic shutter:
Minimum illumination:
Current consumption:
Typical range open air (line of sight):
Typical communication range indoors:
Overall size:
Operational temperature/ humidity:
Storage temperature:
4.3 mm, F1.8 fixed focus
80 degree field of view
2 feet to infinity
360 horizontal TV lines
48 dB
2.41–2.47 GHz
1/3" CMOS color
1/60–1/15000 sec
3 lux
approximately 220mA
200 feet (60 m)
60 feet (18 m)
7.09"L × 3.82"W × 2.28"H (180mm × 97mm × 58mm)
32° to 104° F with 10% to 80% humidity with all components operating
within manufacturer thermal limits
-13º F to 167º F
7
Need help?
Do you have a question about the HMVC3075 and is the answer not in the manual?