Table of Contents
Advertisement
Press [Enter] to reset all fixture personalities (not the adjusting functions) to the default values. On the display
will appear "rSt" meaning that the fixture makes the reset. See the table of personality setting and their default
positions.
Automatic blackout
of display
Display intensity
Lamp Off via DMX
Fan speed
operating mode
By this function you can calibrate and adjust the colour and CMY to their standard/right positions. Use the [+] and
[-] keys to browse through the adjusting menu - the display shows step by step these messages: " PAn, Tilt,
SPEd,Colo, EFEC, rotP,rGob, rotG, Foc, Stro, dimr, FCAL" by which you can adjust the fixture to the required/
desired position (0-255) before the function calibration. Then when the positioning is finished use the last "FCAL"
function (Fixture calibration).
Personality
Display
Pan reverse
Tilt reverse
Movement
resolution
Lamp on
automatically
Adjusting the default positions of colour,gobo and effect wheels
Default settings
Default values
(SHADED)
18
Advertisement
Table of Contents
