Table of Contents
Advertisement
This function enables to switch On the lamp automatically after switching On the fixture. Use the [+] and [-] keys
to select "On" if you wish to switch On the lamp automatically after switching On the fixture or "Off" if you wish
the lamp off after switching On the fixture and press [Enter] to confirm or [Menu] to cancel and return to the
menu.
Readout DMX values of each channel received by the fixture. Use the [+] and [-] keys to select desired channel
and press [Enter] to read its value coming to the fixture or [Menu] to cancel and return to the menu.
This function allows you to keep the display On or to turn Off automatically 2 minutes after last pressing any key
on the control board. Use the [+] and [-] keys to select "On" if you wish to keep the display On or "Off" if you wish
to turn Off automatically 2 minutes after last pressing any key on the control board and press [Enter] to confirm
or [Menu] to cancel and return to the menu.
By this function you can adjust from 20% to 100% the intensity of the display. Use the [+] and [-] keys to select
the level of the display intensity and press [Enter] to confirm or [Menu] to cancel and return to the menu.
Lamp On automatically
DMX values
Automatic blackout of display
Display intensity
16
Advertisement
Table of Contents
