Elation VISION 250 User Manual page 17

This function allows you to switch Off the lamp by DMX. Use the [+] and [-] keys to select "On" if you want to
switch Off the lamp by DMX or "Off" if you don't want to switch Off the lamp by DMX and press [Enter] to confirm
or [Menu] to cancel and return to the menu.
Temperature readouts of fixture inside in Celsius. Inside temperatures below 60° C are not critical. 60° C and more
lead to the lamp being switched off. Please note that the outside temperature should not exceed 45° C.
By using this function you can choose 4 types of fan speed operating modes. Browse through this menu by the
pressing [+] and [-] keys - the display shows step by step these messages: "HIGH, reG, LoOF, Lo.HI,". Press
[Enter] if you wish to select one of them or [Menu] to cancel and return to the menu.
The cooling fan works on max. speed (max. cooling)
the fan automatically raises its speed in order to control inside temperature of the lighting,
if the temperature inside increases about certain level (the low fan speed reduces the cooling of the
lighting). This cycle can repeat several times until the temperature inside is on suitable level.
the fan keeps the adjusted low speed until the temperature exceeds max. inside temp., then the VISION
250 automatically switch Off the lamp.
the fan keeps the adjusted low speed until the temperature exceeds max. inside temp.of the fixture,
then the VISION 250 automatically switch from low to high the fan speed.
Lamp Off via DMX
Temperature
Fan speed operating mode
high (max) speed of fans
continuous controlling of the fan speed
low speed/Switch Off the lamp operating
low/high speed of the fan operating
17