Sagem FAX 3245 User Manual page 11

Chapter 1. Installation
8
Close the cover. Make sure that the cover snaps se-
curely into position on both sides.
9
new cartridge?
appears on the display. Con-
fi rm with OK.
10 Wait until
insert card
Push the Plug'n'Print card of the new toner cartridge
into the opening on the left side next to the paper
tray, with the contacts facing to the left. (Only the
starter cartridge can be used without inserting a
Plug'n'Print card.)
Should the error message
¡
card
appear on the display, you may have
inserted the Plug'n'Print card incorrectly. Th e con-
tacts must face to the left as you insert the card
into the machine.
11 It may take a moment to update the cartridge. When
the process is completed, the following appears on
the display:
action completed / remove card
12 Pull the Plug'n'Print card out of the fax machine.
You can interrupt the recharging process at any time by
simply pressing STOP. However, the toner level memo-
ry must be updated for each new toner cartridge. If you
have pressed the STOP key by mistake, you can restart
appears on the display. the recharging process as follows:
1
2
If the toner level of your cartridge is low, then every time
you open and close the cover, the following question will
appear on the display:
installed a new cartridge, press STOP. If you have in-
stalled a new cartridge, press OK and follow the descrip-
tion set forth above.
Displaying the Toner Level
Æ
Cannot read
1
2
3
Press MENU/OK, and OK
62
new black
Select with
¾
OK. Select
yes
with . After a short time, the fax
¾
machine will ask you to insert the Plug'n'Print card.
black=new?
Whenever you insert a new toner cartridge,
you must update the toner level memory of
your fax machine with the Plug'n'Print card that is
included with the new cartridge. Your fax machine
registers the extent of toner usage for every print-
out and calculates the toner level of the cartridge
based on this. Th e indicated toner level is only
meaningful if you update each new toner cartridge
with the Plug'n'Print card provided.
Press MENU/OK, and OK.
62
cart capacity
Select with
with OK. Th e toner level of the toner cartridge is
indicated by a percentile value between 100 percent
(full) and 0 percent (empty).
Pressing C will return you to the previous menu step;
pressing STOP will return you to the root menu.
1. Installation 1. Installation
11
, and confi rm with
If you have not
and confi rm
¾