Assembly Instructions - Matrix U3X-05 Service Manual

CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE

10.2 ASSEMBLY INSTRUCTIONS

AFTER THESE ASSEMBLY STEPS ARE COMPLETE, BE SURE TO SETUP AND TEST THE UNIT AS OUTLINED
STEP 1
56
IN SECTION 9.19.
PART
A
B
Open YELLOW HARDWARE BAGS.
A
Attach the FRONT STABILIZER TUBE
B
(1) to the MAIN FRAME (2) using 4
BOLTS (A) and 2 FLAT WASHERS (B).
Attach the REAR STABILIZER TUBE (3)
C
to the MAIN FRAME (2) using 4 BOLTS
(A) and 2 FLAT WASHERS (B).
YELLOW HARDWARE BAGS
TYPE DESCRIPTION
SOCKET HEAD BOLT M8X25L
FLAT WASHER Φ8.2XΦ16.0X2.0T
QTY
8
8