Operating Modes; Acquisition Control; Acqusition Mode; Single Frame - JAI Elite EL-2800M-GE2 User Manual

7.

Operating modes

7.1.

Acquisition control

7.1.1

Acqusition mode

In the EL-2800M-GE2 and EL-2800C-GE2, the following three acquisition modes are available.

Single frame :

Multi frames :
Continuous :
7.1.1.1 Single Frame
In single frame mode, executing the AcquisitionStart command causes one frame to be captured.
After one frame is captured, this operation is automatically stopped.
In order to restart the capture, it is necessary to input the AcquisitionStart command again. BlockID
is not reset until AcquisitionStop is input and is incremented when the AcquisitionStart command is
called. In the case of PIV operation, 2 frames are captured instead of one frame.
◆ Normal single frame operation
1) AcquisitionStart command is input
2) AcquisitionActive becomes "TRUE" (accepts capture)
3) 1 frame is output
4) AcquisitionActive becomes "FALSE" (stop capturing)
◆ Forcing acquisition to stop
While AcquisitionActive is "TRUE", if AcquisitionStop or AcquisitionAbort is
initiated, AcquisitionActive becomes "FALSE" (stop capturing).
However, if AcqusitionStop command is initiated during image output period,
AcqusitionActive becomes "FALSE" (stop capturing) after image output is completed.
Associated command: Acquisition Start, Acquisition Stop
EL-2800M-GE2 / EL-2800C-GE2
One frame can be output by AcqusitionStart command
The number of frames which is specified in Acquistion Frame Count, are
output by AcquisitionStart command
Images are continuously output by AcquisitionStart command until
AcqusitionStop command is input.
- 49 -