Locations And Functions - JAI Elite EL-2800M-GE2 User Manual

4.

Locations and functions

4.1 Locations and functions
 Lens mount
 10-pin connector
 LED
 12-pin connector
 LED (LINK)
 LED (ACT)
 RJ45 connector
 Hole for RJ-45 fixing screw
 Hole for RJ-45 fixing screw
 RJ45 connector
Mounting holes
⑪
Note1: Rear protrusion on C-mount lens must be less than 10.0 mm.
Note2: When an RJ-45 cable with thumbscrews is connected to the camera, please do not
excessively tighten screws by using a screw driver. The RJ-45 receptacle on the camera
might be damaged. For security, the strength to tighten screws is less than 0.147 Newton
meter (Nm). Tightening by hand is sufficient in order to achieve this.
Note3: The part number for the tripod adapter plate (with 1/4"-20 thread) is MP-42 (option).
EL-2800M-GE2 / EL-2800C-GE2
C-mount (Note *1)
AUX Connector for lens control (Standard)
Indicator for power and trigger input
DC and trigger input
GigE network indication (LINK for GigE 1)
GigE network indication (ACT for GigE 1)
GigE connector 2 (With lock mechanism)
Hole for RJ-45 fixing screw (Horizontally) (Note*2)
Hole for RJ-45 fixing screw (Vertically) (Note*2)
GigE connector 1 (With lock mechanism)
Holes for mounting tripod base or direct installation.
Depth 5 mm (Note*3)
Fig. 1
- 11 -
Locations