Continuous Mode - JAI Elite EL-2800M-GE2 User Manual

7.1.1.3

Continuous mode

In this mode, when the AcquisitionStart command is set, the image is continuously output at the
current frame rate. This is the default setting for the EL-2800M-GE2 and EL-2800C-GE2.
1) AcquisitionStart command is input
2) AcquisitionTriggerWait becomes effective
3) AcquisitionActive becomes "TRUE"
4) Images begin outputting continuously
5) AcquisitionStop command is sent
6) AcquisitionActive becomes "FALSE". At this moment, the output stops.
However, if AcqusitionStop command is initiated during image output period,
AcqusitionActive becomes "FALSE" (stop capturing) after image output is completed.
The following diagrams show the Continuous Timing relationships.
Conditions:
Acquisition mode:
Trigger selector:
Trigger mode:
Output Signals
Acquisition
Active
Exposure
Active
(Sensor
Exposure)
Frame
Active
FVAL(Sensor Read
(Stream
Active)
Acquisition Trigger Wait = L
Frame Trigger Wait =L
Acquisition
Status
Acquisition
Active
Frame
Active
Exposure
Active
Acquisition Trigger
Wait
Frame Trigger Wait
EL-2800M-GE2 / EL-2800C-GE2
Acquisition Start
command
out)
FALSE
FALSE
FALSE TRUE
Fig.32
Continuous
Acquisition Start
OFF
TRUE
TRUE
FALS TRUE FALS
E E
FALSE
FALSE
Continuous Timing
- 57 -
Acquisition Stop
command
TRUE FALSE
FALS
E
FALS
E