Notes For Connecting 100Base-Tx; Example Of Setting Method Of Link Aggregation - JAI Elite EL-2800M-GE2 User Manual

5.1.1.4

Notes for connecting 100BASE-TX

 In order to use 100 Mbps network, 100BASE-TX and Full Duplex are available. Half Duplex
cannot be used.
 In the case of connecting on 100BASE-TX, the maximum packet size should be 1500 bytes.
 In the case of connecting on 100BASE-TX, the specifications such as frame rate, trigger
interval and so on described in this manual cannot be satisfied.
5.1.1.5

Example of setting method of Link Aggregation

1. Intel NIC driver installation
In Windows 7 or Windows 8.1 OS, when a NIC is installed and the PC is started, the default driver
supported by the Microsoft OS may be automatically installed. The Microsoft driver does not have
the "Teaming" function needed for the GigE Vision Link Aggregate Method (LAG). Therefore, in
order to make the "Teaming" function available, it is necessary to install the Intel NIC driver. Please
note that if Intel ceases support for this driver, "Teaming" may not be available on the latest OS.
The following describes the procedure to install the Intel NIC driver.
Navigate to the Intel web site and open the Drivers & Software page. Select the appropriate items
from the drop-down selection lists.
In this example, select Network Connectivity, Intel Server Adapters, Intel PRO1000 PT Dual Port
Server Adapter and Drivers & Software. Then click the "Find" button.
EL-2800M-GE2 / EL-2800C-GE2
- 16 -