Table of Contents
Advertisement
EL-2800C: AnalogAll：1.0～22.555
DigitalAll：0.7079～1.4125
Digital Red All：0.4466～3.1623
Digital Blue All：0.4466～3.1623
Digital Tap2All：0.8912～1.1220/
Digital Tap2Red：0.8912～1.1220/
Digital Tap2Blue：0.8912～1.1220
Digital Tap3All：0.8912～1.1220/
Digital Tap3Red：0.8912～1.1220/
Digital Tap3Blue：0.8912～1.1220
Digital Tap4All：0.8912～1.1220/
Digital Tap4Red：0.8912～1.1220/
Digital Tap4Blue：0.8912～1.1220
8.2.3
Gain Raw
The gain raw can be adjusted in the following range.
EL-2800M:
AnalogAll：0 ～ 840
Digital Tap2All/ Digital Tap3All/ Digital Tap4All：-891～+1000
EL-2800C:
AnalogAll：0 ～ 756
Digital Tap2All/Digital Tap3All/Digital Tap4All：-891～+1000/
Digital Red All/Digital Blue All：-4533～17713
Digital Tap2Red/Digital Tap2Blue：-891～+1000
Digital Tap3Red/Digital Tap3Blue：-891～+1000
Digital Tap4Red/Digital Tap4Blue：-891～+1000
8.2.4
Gain Auto
This function automatically controls the gain level. This function is effective only for Frame trigger
OFF and RCT modes.
This is controlled by the command ALC Reference.
There are three modes.
OFF:
Once:
Continuous:
The following detailed settings are also available.
ALC Speed:
Gain Auto Max:
Gain Auto Min:
ALC Reference:
ALC channel area:
EL-2800M-GE2 / EL-2800C-GE2
Adjust manually.
Operate only one time when this command is set
Operate the auto gain continuously
The rate of adjustment of GainAuto can be set.(Common with
Exposure Auto)
The maximum value of GainAuto control range can be set
The minimum value of GainAuto control range can be set
The reference level of Gain Auto control can be set (Common
with Exposure Auto)
The area of GainAuto control can be set, either entire area or
individual section
- 75 -
Advertisement
Table of Contents
