Table of Contents
Advertisement
7.1.4.2
V Binning On
The frame rate is the smaller of the Sensor frame rate or the Network frame rate.
Sensor Frame Rate (fps) = 1000000/〔 ［ (Height/2) + {(360-(Height/2)-1)/2} + 16 ］
OR
Network_Frame_Rate(Hz) = Network_Bit_Rate / [{(Width × Height × BitsPerPixel /
Note1: The network bit rate is;
1000000000 for Single
2000000000 for LAG
Maximum guaranteed bandwidth is 93% (0.93) of this value
Note2: The bit per pixel value is the number of bits associated with the selected pixel
Format, refer to 7.1.4.1.
7.2.
Exposure settings
7.2.1
Exposure Mode
The exposure mode can be selected from the following three ways.
Table18. Exposure mode
Exposure Mode setting
OFF
Timed
Trigger Width
For trigger operation, Exposure Mode must be set to something other than OFF and Trigger Mode of
Frame Start must be ON.
If Exposure Mode is set at Timed, the exposure operation can be selected as follows by setting
Trigger Option
Table19. Trigger option
Trigger Option setting
OFF
RCT
PIV
EL-2800M-GE2 / EL-2800C-GE2
×29.296 〕
8) / (Packet_Size - 36) + 1} × (Packet_Size + 14) + 44] / 8
Exposure operation
No exposure control (free-running operation)
Exposure operation at the value set in Exposure Time. Setting value is usec unit.
・If Trigger Mode setting is OFF, the camera is in free-running operation.
・If Trigger Mode setting is ON, the exposure operation depends on the setting of
Trigger Option.
The exposure is controlled by the pulse width of the external trigger.
・Trigger Mode is forced to ON.
Exposure operation
Timed (EPS) mode
RCT mode
PIV (Particle Image Velocimetry) mode
- 61 -
Advertisement
Table of Contents
