Note 1: If binning mode is used, the maximum values are adjusted accordingly.
Note 2: Only for GO-5000M-PGE
Note 3: Only for GO-5000C-PGE
8.10
Delayed Readout function
The images captured by Frame Start trigger can be stored inside the camera and read out by
Acquisition Transfer Start trigger. Up to 7 frames at 8-bit operation can be stored. For 10-bit/12-bit
operation, it is 3 frames.
Table-29 Delayed readout command
Command
Trigger Selector
Trigger Mode
Trigger Source
Trigger Activation
GO-5000M-PGE / GO-5000C-PGE
Index 4
Offset X
Index 3
Offset X
Index 2
Offset X
Index 1
Index 1
Offset X
Width
ROI 1
Fig.34
Multi ROI setting example
Setting
Acquisition Transfer Start
On
Select the source to be
used
Select the polarity of the
source to be used.
Index 3
Width
Index 2
Width
ROI 2
ROI 3
H-Binning Off
Width Max = 2560
Select the Trigger Selector at Acquisition
Transfer Start to operate this function.
Refer to Chapter 8.3
- 50 -
Index 4
Width
ROI 4
Description