Connecting A Camera To Each Port Of A Multi-Port Nic; The Data Transfer For Multiple Cameras; If Delayed Readout Is Not Used In Continuous Mode - JAI AM-800GE User Manual

8.4.2 Connecting a camera to each port of a multi-port NIC


This is the example for using a 4-port NIC

The pair of the connecting camera and the NIC constructs one subnet. As for
the IP configuration, it is appropriate to use the persistent IP.

In this case, each camera can use the maximum 800Mbps band width.
However, the load for the internal bus, CPU and the application software
become heavy, so a powerful PC will most likely be required.

8.4.3 The data transfer for multiple cameras

8.4.3.1 If delayed readout is not used in continuous mode


The packet delay should be set larger. The data traffic is controlled by the
buffer of the hub. It is necessary to check the buffer value of the unit.
AM-800GE / AB-800GE
- 38 -