Troubleshooting - Yardworks 060-3874-8 Owner's Manual

TROUBLESHOOTING

PROBLEM
Bag full
Blocked tube
Blocked impeller
Dirty bag
Torn bag
Bag unzipped
Unit
PROBLEM
Unit is unplugged.
Power/speed switch is in the OFF position.
Defective power switch.
Vac tubes are not correctly installed.
Intake gate/cover is not closed.
House circuit may have tripped.
UNIT WILL NOT BLOW OR MULCH
UNIT WILL NOT START
CORRECTIVE ACTION
Empty bag.
Clear the blockage as described on page 20.
Clear the blockage as described on page 20.
Clean the bag.
Replace the bag.
Zip up the bag.
Plug into an outlet or an extension cord.
CORRECTIVE ACTION
Check cord to make sure it is plugged into an
electrical outlet.
Slide switch to high or low.
Call Toll-free Helpline: 1-866-523-5218
Check vac tubes to ensure that they are allowing
the switch to be engaged when correctly installed.
Ensure that gate/cover is fully closed and
locked.
Check wall circuit breaker panel and reset if
necessary.
22