Front Tv Ignition Switch Interlock; Audio/Video System Basic Operation; Blu-Ray Player And Sound Bar System - Winnebago 2015 Tour Operator's Manual

FRONT TV IGNITION SWITCH
INTERLOCK
–If Equipped
If your coach is equipped with a front
overhead TV, it is plugged into a special
electrical outlet with a built-in ignition switch
interlock. The device allows the front overhead
TV to operate only when the ignition key is in the
Off or Accessory positions.

Front TV Ignition Switch Interlock

-Typical View
AUDIO/VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
"A/V System Basic Operation" guide in
Section 8 of your Operator's Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.
BLU-RAY PLAYER AND
™
SOUND BAR SYSTEM
–If Equipped
™
The Blu-ray Player and Sound Bar System
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped). The TV is connected to
the Sound Bar and Blu-ray player.
To Watch a Blu-ray:
1. Turn "ON" the TV, HDMI Video Selection
System, Sound Bar, and Blu-ray player.
2. Determine which TV you want to use (e.g.
"Lounge" for lounge TV) and select Source
(1) for Blu-ray.
3. Set TV Input to HDMI1 by using the TV
remote or the controls on the TV.
4. Set Sound Bar Source to Optical input by
using the Sound Bar remote.
5. Insert Blu-ray into the player. Blu-ray will
begin to load automatically.
6. The Blu-ray may load directly to the
main title/menu screen or it may
begin to play previews. You may be able to
skip previews if desired by pressing the
chapter "skip" button on the Blu-ray player
remote until you see the main menu screen.
7. When the main menu screen appears, use the
arrow buttons on the Blu-ray player remote to
select the desired entry or press the "Enter"
button on the Blu-ray player remote to begin
playing the feature.
TV Sound through the Sound Bar
(Lounge TV Only)
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to the Sound Bar for a
richer sound quality, follow these steps:
• Turn "ON" the TV and Sound Bar.
• Select the TV channel you wish to watch.
• Press the OPTICAL button on the Sound Bar
remote until audio is heard.
• Turn TV and/or Sound Bar volume up or
down.
Turning TV Speakers On/Off
• Press "Settings" button on remote.
• Select "Audio" option.
SECTION 8 –
ENTERTAINMENT
8-3