Loading A Cut Sheet - Star SP6000 SERIES Hardware Manual

3-7. Loading a
Cut Sheet
(1) Turn on the power switch of the printer.
(2) Set the left side guide to match the size of the paper, and then insert the paper straight in the direction of the arrow
until it stops.
Position for left side of paper
Position for left side of paper
(3) The paper is automatically set to the start printing position.
Note: If cut paper is fed while fanfold paper is set on the tractors, the continuous paper will be released from the
tractors. To use fanfold paper again, reset it onto the tractors.
- 11 -
[ Supported Paper ] 1 sheet
Paper width: 101.6 to 148.0 mm
Paper Length: 101.6 to 210.0 mm
Paper thickness: 0.07 to 0.18 mm
[ Supported Paper ] 1 sheet
Paper size:
A4 Portrait / A5 Landscape
Paper thickness: 0.07 to 0.18 mm