(5) If the ink ribbon will not pass under the head easily, push in the ink ribbon using a thin object.
(6) After loading the ribbon cartridge, rotate the ribbon feed knob again in the direction of the arrow until the ink ribbon
becomes tight.
3-5-2. Setting the Head Gap
Referring to the table below, adjust the head gap according to the paper type and thickness..
Head Gap Position
0
1 (*
1
2
3
(*1: Head gap position 1 is the standard position.
After loading the ribbon cartridge or setting the head gap, attach the printer cover.
Paper Thickness (Total Thickness)
-
0.06 to 0.12 mm
0.12 to 0.16 mm
0.16 to 0.20 mm
- 7 -
( OK )
( NG )