Paper Loading; Line Feed; Paper Eject (Cut-Sheet Paper); Form Feed (Fanfold Paper) - Star LC-7211 User Manual

18 Control Panel Operations

Paper loading

Prepare either cut-sheet or fanfold paper for feeding.
For details on how to prepare for paper feeding, see page 9 for fanfold paper
and page 59 for cut-sheet paper.
The POWER indicator flashes to indicate there is no paper in the printer.
When using fanfold paper, press LF to feed the paper into the printer.
When using cut-sheet paper, insert the paper into the front of the printer
using the left paper guide. The paper is automatically fed into the printer.

Line feed

Make sure the printer is off-line (ON LINE indicator is not lit).
Press LF once to feed paper one line. Holding down LF continually feeds
paper, one line at a time, until you release the button.

Paper eject (cut-sheet paper)

Make sure the printer is on-line (ON LINE indicator is lit).
Press LF to eject the paper.
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.

Form feed (fanfold paper)

Make sure the printer is off-line (ON LINE indicator is not lit).
While holding down LF, press ON LINE to feed the paper to the top of the
next page.

Parking fanfold paper

Make sure the printer is on-line (ON LINE indicator is lit).
Press LF to eject the paper.
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.
Later, you can press LF again to feed the paper back into the printer.