Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP16 User Manual

2. GETTING STARTED

2.1

Baby unit power supply

DC JACK
DC PLUG
1. Insert the small plug of the power adapter into the
socket on the side of the baby unit.
2. Connect the other end of the power adapter to the
mains socket.
NOTE
Only use the provided power adapter.
GETTING STARTED
2.2

Parent unit battery installation

The parent unit comes with a battery pack. Charge the
battery in the parent unit before you use it for the first time
or when the parent unit indicates that the battery is low.
Battery JACK
Battery PLUG
1. Turn the belt clip so that it is in the hanging position.
2. Slide off the battery compartment cover.
3. Insert the wired plug of the supplied battery pack
into the small socket as shown above, and fit the
battery pack into the compartment.
4. Replace the battery compartment cover.
9