Belt Clip On Parent Unit And Baby Unit - Motorola MBP16 User Manual

5. Insert the small plug of the power adapter into the
socket on the side of the parent unit.
6. Connect the other end of the power adapter to the
mains socket.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
IMPORTANT
The battery must be installed for the parent unit to
operate, even with the mains power adapter
connected.
10
2.3

Belt clip on parent unit and baby unit

1. The parent and baby units both have a clip at the
back for hanging or standing the unit.
2. In the normal state, you can use the clip to hang
the unit on a belt or other location. (Note: you should
not hang the baby unit on or too near to the baby.)
3. To change to the stand position, pull the central
part of the clip away from the unit and rotate it 180
degrees to the position shown above.
GETTING STARTED