Temperature; Lullaby; Parent Unit Settings; Set The Language - Motorola MBP16 User Manual

NOTE
If a lullaby is playing, it will stop during Talk Back, but will
restart from the beginning when the Talk Back ends.
3.5

Temperature

The baby unit constantly monitors the temperature in your
baby's room and alerts you if it gets too hot (higher than
39ºC) with the display showing
(lower than 14ºC) with
"LOW
The temperature is displayed clearly on the parent unit's
idle screen. However, it is for reference only, and there
may be a small difference between the displayed reading
compared with the actual temperature. Therefore, please
check the actual temperature in the room against the
display reading.
3.6

Lullaby

There are 5 lullabies available to play for your baby to
sleep.
2
1. Press on the baby unit to select the lullaby
start playing.
2. During playback, press
lullabies.
OR
3
Press on the baby unit to start playing the selected
lullaby. Press again to stop playing.
12
"HIGH TEMP" or too cold
TEMP".
and
2
to step between different

4. PARENT UNIT SETTINGS

4.1

Set the language

9
to access the main menu.
1. Press
+
9
2. Press and
language.
9
3. Press to confirm.
4.2

Sound alert

When sound alert is set on and the parent unit volume
is turned off, the parent unit will emit a sound alert when
when the noise level from the baby unit exceeds a set
limit.
9
to access the main menu.
1. Press
+ -
2. Press or to select
9
to show ON? or OFF?.
3. Press
9
4. Press to confirm.
NOTE
The sound alert icon is displayed when the Sound Alert
is set on.
* The sound is audible only if the sound level at baby side
reaches preset typical sensitivity level.
-
or to select your desired
SOUND ALERT.
PARENT UNIT SETTINGS