Level Firebox In Hearth; Re-Install Burner Module; Connect Gas Line And Test Appliance; Re-Install Top Baffl E (If Removed) - Valor RETROFIRE RF24IDN Installation And Owner's Manual

Level Firebox in Hearth

The backside of each support leg has a leveling bolt. If
necessary, adjust the level of the fi rebox in the hearth.

Re-install Burner Module

Note: If the circulating fan is to be installed it
should be done at this point before installing the
burner module. See instructions packaged with the
fan for details of the fan installation.
Reinstall the burner module using the 10 screws
removed previously.
Note: The upper baffl e may be removed to gain more
room for the screwdriver to install the rear screws.

Connect Gas Line and Test Appliance

Connect the gas line to the burner module. Check
for leaks, purge the line, and test-fi re the unit before
installing the window or proceeding with the remainder
of the install—see section Lighting Instructions.
Re-install Top Baffl e (if removed)
Installation
Leveling
Leveling
bolt
bolt
Front View
Reinstall Burner
Module
(10 screws)
Remove Top Baffle
(2 screws)
Remove Top Baffle (optional)
(to provide space for a screwdriver)
Edge Fits Into
Cleat at Back
Reinstall Top Baffle
(2 screws)
QUALIFIED
INSTALLER
Fret bracket
Leg
Front
Leveling bolt
Side View
Edge Fits Into
Cleat at Back
Back
25