Dimensions - Valor RETROFIRE RF24IDN Installation And Owner's Manual

23"
17-1/4"
3" dia. 3" dia.
Inlet Exh
Front Face of
Cast Fret
26-1/2"
Top View
Gas Inlet
3/8" NPT Female
1-3/4"
26-1/2"
Front View
Minimum Cavity Dimensions
The diagram shows minimum dimensions required to install
the RF24. Cavities having a combination of all the minimum
dimensions shown possible, may prove to be diffi cult
installations.
Important: A free space of 3/4 inch (19 mm) is required in front
of the barrier screen to allow the window to move and relieve
during a hard start. The use of the optional fret sets this space
with the fret bracket installed.
However, when the fret is not used and the bottom cover is
used instead, this space immediately in front of the barrier
screen must be added to the minimum depth as a safety
precaution. It is very important to ensure that the area
immediately in front of the barrier screen is kept clear at all
times even when not using a fret.

Dimensions

Gas Inlet
3/8" NPT Female
2-1/2"
Control Valve
Location
1"
Optional Fret:
Mounting
Brackets
Optional Fan
Speed Control
Location
(this side at front)
Control Valve
24-1/2"
8"
RA24TB Fret (Black)
27"
10"
RA24CV Fret (Vintage Iron)
Optional Frets
Min. 13-1/8"
Max 15"
Adjustable
Convection
Baffle
Maintain a
3/4" gap in
front of
barrier
screen
Barrier
Screen
Optional
Cast Fret
13-1/8" - to screen
13-7/8" - to brackets
1-1/8"
15" - w/fret
Side View
Height to Smoke Curtain
18"
13-1/8" without fret
15" with fret
27"
Minimum Insert Cavity
QUALIFIED
INSTALLER
24-3/8"
7-5/8"
1225VFB Ventana Fret (Black)
25-1/2"
11"
RA24AV Fret (Vintage Iron)
3-1/4"
Levelling
Feet
19-1/2"
17"
17