Fax Troubleshooting - Lexmark S400 Series User Manual

M "E
AKE SURE NABLE NETWORK SCAN TO COMPUTER
C (M
ENTER ACINTOSH ONLY
Notes:
• This is available only in Mac OS X version 10.6.
•
If you have several applications open, then make sure that the Scan Center is the active application. Otherwise,
the correct menu bar does not appear.
From the menu bar, navigate to:
Scan Center > Preferences > General tab
Scanning takes too long or freezes the computer
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
LOSE OTHER SOFTWARE PROGRAMS THAT ARE NOT BEING USED
U
SE A LOWER SCANNING RESOLUTION
Cannot scan to a computer over a network
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
M
AKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE CONNECTED TO THE SAME NETWORK
M
AKE SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER
M "E
AKE SURE NABLE NETWORK SCAN TO COMPUTER
C (M
ENTER ACINTOSH ONLY
Notes:
•
This is available only in Mac OS X version 10.6.
•
If you have several applications open, then make sure that the Scan Center is the active application. Otherwise,
the correct menu bar does not appear.
From the menu bar, navigate to:
Scan Center > Preferences > General tab

Fax troubleshooting

• "Fax troubleshooting checklist" on page 131
• "Cannot send faxes" on page 132
• "Cannot receive faxes" on page 134
)
)
Troubleshooting
" G
IS SELECTED IN THE
" G
IS SELECTED IN THE
130
S
ENERAL TAB OF THE CAN
S
ENERAL TAB OF THE CAN