Lexmark S400 Series User Manual page 146

Wi-Fi indicator light is green but the printer does not print (Windows only)
If you have completed the configuration for wireless printing and all of the settings appear to be correct, but the printer
does not print, then try one or more of the following:
A
LLOW THE WIRELESS INSTALLATION TO COMPLETE
Do not attempt to print, remove the installation CD, or detach the installation cable until you see the Wireless Setup
Successful screen.
E
NABLE THE PRINTER
Confirm that the printer is enabled:
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
The printer folder opens.
4
Right-click the new printer; from the menu, select Use Printer Online.
5
Close the Printers or Printers and Faxes window and try printing again.
S
ELECT THE WIRELESS PRINTER
You may need to select the wireless printer from your computer to use the printer wirelessly.
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
The printer folder opens.
4
Right-click the printer in the folder with the matching name and model number followed by "(Network)."
5
Select Use Printer Online from the menu.
6
Close the Printers or Printers and Faxes window and try printing again.
S
ELECT THE WIRELESS PORT
If you have previously set up your printer as a locally attached printer, then you may need to select the wireless
printer to use the printer wirelessly.
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
The printer folder opens.
4
Right-click the printer, and then select Properties or Printer properties from the menu.
5
Click the Ports tab.
Troubleshooting
146