Flavel Misermatic FRCM1G Installation And Maintenance Instructions Manual page 25

CLEANING THE RADIANTS
The ceramics may discolour slightly over a period of time, this is normal for radiant
fires. Any dust or small soot deposits that accumulate on the ceramics can easily
be cleaned. Carefully remove the ceramics and brush gently with a soft brush.
To remove the ceramic, remove the dress-guard as shown in fig. 2.
Remove the radiants by lifting them slightly then pulling forward as shown below in
Fig. 3
Fig.3
REPLACING THE RADIANTS
When replacing the radiants, always ensure that they are correctly located as
shown in Fig. 4 below
Fig. 4
Ensure that the rear face of
the ceramic radiant is touch-
ing the front edge of the
positioning plate as indicated
5
Front Edge of the
Positioning Plate