Attendance Messages - Lexmark Optra C710 User Manual

Status messages (continued)
Message
Defragmenting Flash
Formatting Disk
Programming Disk
Network Card Busy

Attendance messages

Message
Close Door
Insert Tray x
Change media
150
Chapter 8: Understanding printer messages
Meaning
The printer is performing the defragmentation operation on flash memory. This
operation is used to reclaim flash memory space occupied by deleted resources.
No buttons are active when this message is displayed. Do not turn the printer off
while this message is displayed.
The printer is formatting the hard disk. Do not turn the printer off while this
message is displayed. No buttons are active when this message is displayed.
The printer is storing resources on the hard disk. Do not turn the printer off while
this message is displayed.
The network adapter is being reset. The Network x Setup menu is not available
while this message is displayed.
Attendance
Attendance messages alert you to printer problems that
require your intervention.
messages
Action
Close the printer's front cover, fuser cover, or cartridge cover.
Insert the tray indicated (tray 1, 2, or 3).
The printer is requesting a different size or type media than what it detects is in the
identified tray (tray 1, 2, 3, or the multipurpose feeder). The message displays
either the custom media name defined using the MarkVision utility, the media size,
or the media size and type it is looking for.
To clear the message:
• If the correct paper type is loaded in the tray (but the Paper Type setting was not
changed from the operator panel), press
• Press to ignore the request and print on the media already installed in
Select
the tray.
• Load media of the requested size and type in the tray indicated.
• Cancel the print job. Press
or
Menu> <Menu
Go
or
Menu> <Menu
until Cancel Job appears on the second line. Press
to continue printing.
. The Job Menu is displayed. Press
Select.