Replacing Supply Items - Lexmark Optra C710 User Manual

supply items
Printing
SUPPLIES
1 Menu 2
Go 5
120
Chapter 7: Replacing supply items
Replacing
Select 3 Return 4
Stop 6
copying on a monochrome copier. This saves the toner in
the magenta, cyan, and yellow print cartridges.
The printer calculates and stores information on the num-
ber of images that have been printed. When a count for a
supply nears the end of the supplies life, the
tus message appears on the second line of the display to
remind you there are supplies that need attention. Open
the Supplies Menu to view the supplies that need to be
replaced. Replacement of these parts ensures peak printer
performance and prevents print quality and paper feed
problems resulting from worn parts.
The printer counter keeps track of your print cartridges,
coating roll, fuser and transfer belt life. It posts an end of
life warning or an exhausted message on the operator
panel. These messages appear before the life of the item is
exhausted so you can obtain and replace them. If you do
not have the appropriate supply item on hand, order one
at this time.
You can press to clear the attendance message. The
Go
status message appears on the second line of the
Supplies
display to remind you there are supplies that need atten-
tion. You can press
Menu>
Menu and quickly determine the supply items that need
to be replaced.
The printer continues to display the
sage each time you turn the printer on and each time you
open and close the cover, until you replace the required
supply items.
After the status message appears, the printer con-
Supplies
tinues to monitor the required supply items until the sup-
ply is exhausted. The printer will display
item empty.
Supplies
or to open the Supplies
<Menu
status mes-
Supplies
item exhausted
sta-
or